Rustbuster Slosh tank sealer has been manufactured and supplied to the automotive industry for 30 years and is proven and tested to be 100% Ethanol proof. It will resist Petrol with well over the current and proposed new fuel standards E10 - E15. We have tested Slosh tank seal with up to 100% Corn Bio-Ethanol with absolutely no degradation or softening of the sealer.
Packs come supplied with step by step instructions,
We recommend a thorough cleaning with Rustbuster SP10/Tank-Kleen prior to application of the sealer.
Select size from the drop down menu below. Small or Large
A small kit will clean and seal up to a ten gallon ( 50 ltrs) tank and is recommended for Motorcycle tanks and small cars.
A Large Kit will clean and seal a tank size up to 20 gallon 100 ltrs
The kit contains 500ml Of Tank -Kleen Caustic Detergent
425 or 850 ml of Slosh tank seal depending on the size ordered.
2 x pairs of vinyl gloves
Full application instructions.
Slosh tank seal can be used in the following tanks.
GRP/Glass fibre in good solid condition with no cheesy softening or Ethanol damage.
We do not recommend Slosh tank sealer for Plastic tanks.
Do ... Use some sharp stones as abrasive with the Tank Kleen solution to help removal rust and old petrol deposits.
Do ... Allow enough time for the tank to be 100% bone dry before you put the sealer into the tank.
Do ... Remove any sender units and filter baskets.
Do Not .. apply the sealer into a wet or even damp tank, it reacts with moisture and will cause a bubbling reaction.
Do Not .. allow the sealer to pool in a very thick layer as this will cause the solvents to get trapped within the coating and again can cause a bubbling reaction.
Its not hard to do and does not require great skill but it does take time to do correctly, its not a job you can rush.
Telephone Orders: 01775 761 222
£26.39 Inc VAT
(£21.99 (Outside EU)ex VAT)